Product FAQs

Starlyf Power Washer

'NO WATER FLOW' TROUBLESHOOTING

1. Check the hose
   • Make sure the hose is not kinked, twisted, or crushed.
   • If it is misshapen, place it in warm water briefly and gently reshape it.
2. Charge the battery
   • Ensure the battery is fully charged.
   • A full charge typically takes around 4 hours.
3. Prime the system
   • Press and hold the trigger continuously for several seconds.
   • This allows water to travel through the hose and into the unit.
4. Clear a possible air lock

   If the issue persists, an air lock may be preventing water flow, try the following steps:

   1. Remove the hose adapter from the gun.
   2. Turn the unit upside down.
   3. Pour approximately one cup of water into the water inlet (IMAGE A).
   4. While pouring, hold the trigger to allow water to flow through and exit the nozzle.
   5. Reattach the adapter and test the unit.



IMAGE A



5. If using a bucket as a water source
   • While holding the trigger, move the hose and filter around in the water.
   • This helps release any trapped air in the system.

Note: You may need to repeat these steps several times to fully resolve the issue.